PDA

View Full Version : [WTS] Hoya Pro 1 Digital UV Filter


yamiya
03-13-2008, 02:31 AM
http://www.yamiya.com.my/store/images/HOYA/pro1d-image.jpg

http://www.yamiya.com.my/store/images/HOYA/pro1d-uv.jpg

A Multi-Purpose Fine-Weather Filter
Absorbs the ultraviolet rays which often makes outdoor photographs hazy and indistinct. A multi-purpose, fine-weather filter for color as well as black and white films. Also serves as a permanent lens protector.

With UV Filter
http://www.hoyafilter.com/products/hoya/images-pro1d/SP-UV-After.jpg

Without Filter
http://www.hoyafilter.com/products/hoya/images-pro1d/SP-UV-Before.jpg

Attach or Retouch?
Wouldn’t you rather spend your time attaching the right filter than retouching every photo? Attaching the right filter can replace the need to retouch each digital photo you take.Using filters allows you to spend more time taking photos and less time in front of the computer!

Digital Cameras Need Multicoated Filters
Digital camera CCD or CMOS sensors are highly susceptible to reflections - this stray light can ruin your photographs! Don't risk your valuable photos by using bare-glass filters.

http://www.yamiya.com.my/store/images/HOYA/ffsensor.JPG

http://www.yamiya.com.my/store/images/HOYA/Multi-Coating.jpg

HOYA - The Clear Advantage
Take a bare glass filter, hold it so that light reflection off the surface can be seen. Then take a long, very thin object like a pin or the tip of a pen and hold it over the filter so that its reflection can be seen. There will actually be two reflections of the pin on the surface, one a little more pronounced than the other. The more pronounced reflection is from the front surface and the lighter one is from light reflecting off the rear surface. Now try it with a HOYA Digital Multi-Coated filter and see how much more dim the reflection is, a dimmer reflection means less light is reflected off the surface of the glass.

HOYA PRO1 Digital Series - Key Features
Digital Multi-Coated
Digital multi-coated filters greatly reduce the appearance of lens flare and ghosting caused by reflections.

Black Almite Frame
Filters feature a black matte aluminum satin finish almite frame which reduces reflections.

Black Rimmed Glass
These filters are equipped with black rimmed glass to reduce the chance of light reflecting off the edge.

Low Profile Frame
Ultra thin filter frames to help avoid vignetting on super wide angle lenses are also designed to hold a lens cap.

Knurling Edge Frame
These filters are equipped with a straight knurling edge for non-slip, easy attachment and removal.

UV Protected Case
Filter cases are UV protected to further lengthen the life of filters.

Available sizes:
52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm

Click here to purchase at Yamiya eStore. (http://www.yamiya.com.my/store/home.php?cat=376)

AdrianLoke
03-13-2008, 08:46 AM
This one can leave there forever right?:?

yamiya
03-13-2008, 11:51 AM
This one can leave there forever right?:?

Hi AdrianLoke,

I don't get your question. What do you mean leave there forever?

Thank you.

AdrianLoke
03-13-2008, 11:55 AM
Oh, sorry. I was wearing my retarded english cap when I wrote that.:D What I meant does this one protect the lens and with this do I need to put back lens cap.

yamiya
03-13-2008, 12:01 PM
Oh, sorry. I was wearing my retarded english cap when I wrote that.:D What I meant does this one protect the lens and with this do I need to put back lens cap.

Hi AdrianLoke,

Besides filtering the UV ray that cause hazy pictures, UV filters also function as a protection for your expensive lens. Scratch on the filter can be replaced by a new filter, but scratch on lens would mean sending it back to the factory and expensive workmanship and repair cost. For the best lens protection, use lens hood all the time, and put the lens cap back when not using. :)

AdrianLoke
03-13-2008, 12:02 PM
Hi AdrianLoke,

Besides filtering the UV ray that cause hazy pictures, UV filters also function as a protection for your expensive lens. Scratch on the filter can be replaced by a new filter, but scratch on lens would mean sending it back to the factory and expensive workmanship and repair cost. For the best lens protection, use lens hood all the time, and put the lens cap back when not using. :)
So I can put a lens cap on top of this filter?

yamiya
03-13-2008, 12:10 PM
So I can put a lens cap on top of this filter?

Hi AdrianLoke,

Of cos you can. Most HOYA circular filters models, including CPL and UV have thread on it, which allows you to screw another filter onto it or put lens cap on top of it.